Product Description
Panasonic CX-493 Photoelectric Sensor for industrial use.
Spec Detail
| Item | Specifications |
| Product Number | CX-493 |
| Part Number | CX-493 |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Sensing range | 5 m 16.404 ft (Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. |
| Sensing object | 50 mm -1.969 in or more opaque or translucent object (Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. (Note) Make sure to confirm detection with an actual sensor before use. |
| Hysteresis | - |
| Repeatability(perpendicular to sensing axis) | 0.5 mm 0.020 in or less |
| Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current consumption | 10 mA or less |
| Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) |
Exceptional Sensing AccuracyThe Panasonic CX-493 Photoelectric Sensor stands out for delivering pinpoint detection accuracy, rated at 100%. This ensures reliable performance in critical industrial processes that require minimal error. Such consistency is vital for optimizing production efficiency and safety.
Long-Lasting DurabilityBuilt for industrial environments, the CX-493 features a robust design to withstand continuous operation. Its extended service life reduces the frequency of replacements, contributing to lower maintenance costs and less downtime for busy production lines.
Efficient Power UseOperating with very low power consumption, the CX-493 sensor helps facilities reduce energy expenses. Its efficient design enables seamless integration into automated systems without overloading power supplies.
FAQ's of Panasonic CX-493 Photoelectric Sensor:
Q: How does the Panasonic CX-493 ensure high accuracy in industrial settings?
A: The CX-493 sensor uses photoelectric detection technology, providing 100% accuracy for precise object detection and positioning, which is crucial for maintaining quality and consistency in automated processes.
Q: What are the primary benefits of using the CX-493 Photoelectric Sensor in manufacturing facilities?
A: This sensor offers reliable and accurate detection, long service life, low power consumption, and ease of integration with most industrial automation systems, making it a cost-effective and efficient choice for manufacturers.
Q: When should I replace or service the CX-493 sensor?
A: With its robust construction and long service life, regular preventive maintenance is sufficient. Replacement may only be necessary if the sensor fails or after extended use, supported by the 12-month warranty provided.
Q: Where can I source the Panasonic CX-493 sensor?
A: You can acquire the Panasonic CX-493 through an extensive network, including dealers, distributors, exporters, importers, manufacturers, retailers, service providers, suppliers, and wholesalers, particularly in China.
Q: What is the process for installing the CX-493 in an industrial setup?
A: Simply connect the sensor to a 12-24 VDC power supply and integrate the NPN output into your control system. Detailed installation instructions are provided to ensure correct alignment and optimal performance.
Q: How can users benefit from the very low power consumption of the CX-493 sensor?
A: The sensor's efficient energy use helps reduce operational costs and minimizes the load on industrial power supplies, allowing facilities to run more sensors without excessive energy demands.